The ABB 3AXD50001109646 is an ACH580-01 wall-mounted HVAC drive rated 1.5 kW normal-use (Pn) at 7.6 A on a 200-240 V three-phase supply. Heavy-duty output is 1.1 kW at 6.6 A; light-overload UL listing is 2 Hp at 7.5 A. The drive includes the control unit, two analog inputs and two analog outputs, plus 6 digital inputs and 3 digital outputs. BACnet is the onboard communication protocol — no option card needed for BAS integration. Enclosure is IP66 / NEMA 4X, so it can mount directly on the wall in washdown or outdoor locations without a separate cabinet.
The 0.98 power factor is typical for a modern active-front-end drive — no need for external power-factor correction on the line side. Standby loss of 13 W matters for energy codes that penalize idle draw; this drive meets that threshold for most HVAC schedules. Maximum ambient is 40 °C; if the drive is in a hot mechanical room or direct sun, derate output current or add ventilation.
Integration notes
Wall-mounted means the drive has integral mounting tabs and a gland plate for cable entry — no backplate or sub-panel needed. The IP66 / NEMA 4X rating allows hose-down cleaning, so it suits food-processing or car-wash HVAC loops. The BACnet MS/TP port is standard; no gateway required to talk to a building controller. The lithium coin cell (CR2032, 220 mAh) keeps the real-time clock and parameter backup; replace it during commissioning if the drive has been in storage over a year.