Skip to main content
Log in
ABB 3AXD50001110017 — AC Drive (VFD) 240V

ABB 3AXD50001110017 ACH180 Micro Drive, 0.75 kW, 4.8 A

MPN3AXD50001110017
Active

ABB ACH180 series, LV AC micro drive module for HVAC, 0.75 kW / 4.8 A normal use, 200-240 V single-phase, frame R0, IP20, BACnet.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3AXD50001110017 — Electrical Output
ParameterValue
Output power, normal duty (Pn)0.75 kW
Output current, normal duty (In)4.8 A
Output power, heavy duty (PhD)0.55 kW
Output current, heavy duty (IhD)3.5 A
Output power, light-overload duty (PlD)0.75 kW
Output current, light-overload duty (IlD)4.6 A
Output power, heavy duty (UL, Hp)0.75 Hp
Output current, heavy duty (UL)3.7 A
Apparent power output1.9 kV·A
Output power, light-overload duty (UL, Hp)1 Hp
Output current, light-overload duty (UL)4.6 A
Power consumption48 W
3AXD50001110017 — Electrical Input
ParameterValue
Input voltage range200 ... 240 V
Number of phases1-phase
Frequency47.5 ... 63 Hz
Power factor0.98
3AXD50001110017 — Control & I/O
ParameterValue
Digital inputs / outputs4 / 2
Communication protocolBACNET
Analog inputs2
Analog outputs1
Hardware interfacesIndustrial Ethernet 0
3AXD50001110017 — Environmental
ParameterValue
Altitude2000 m
3AXD50001110017 — Mechanical
ParameterValue
Degree of protection (IP)IP20
Enclosure type (NEMA)Open Type
Frame sizeR0
Mounting typeModule

Product details

The 3AXD50001110017: Normal-use output is 0.75 kW / 4.8 A — that's the continuous rating for typical fan and pump curves. Light-overload use matches the normal-use power at 0.75 kW / 4.6 A, with a slightly lower current limit for applications that rarely hit peak demand. Under UL listing, the light-overload rating is 1 Hp / 4.6 A, heavy-duty is 0.75 Hp / 3.7 A. Apparent power output is 1.9 kV·A, and the drive draws 48 W at rated load. Power factor sits at 0.98, which keeps the input current clean for the panel feed.

I/O and communication — BACnet native, no gateway needed

The drive carries 2 analog inputs and 1 analog output, plus 4 digital inputs and 2 digital outputs. That's enough for a start/stop, speed reference from a BMS, and a run-status feedback. BACnet is on the communication protocol list — no extra gateway or protocol converter required for building automation integration.

Frame size R0, IP20 enclosure, NEMA Open Type. Mounts as a module — DIN-rail or panel-mount, depending on the kit. Single-phase input only, so it's not for three-phase line feeds.

Frequently asked questions

What are the key output ratings for this drive?

Normal use: 0.75 kW / 4.8 A. Heavy-duty use: 0.55 kW / 3.5 A. Light-overload use: 0.75 kW / 4.6 A. UL light-overload: 1 Hp / 4.6 A.

What communication protocol does this drive support?

BACnet is the listed communication protocol — no gateway needed for building automation integration.

What is the input voltage and phase requirement?

200-240 V single-phase, 47.5-63 Hz. Not for three-phase line feeds.

What is the frame size and protection rating?

Frame size R0, IP20 enclosure, NEMA Open Type. Rated for altitudes up to 2000 m.

MPN
3AXD50001110017