What it is on the BOM
The ABB ACS180-04S-03A7-2 is a member of the ACS180 series, filed in the Motor Drives class under Motors & Motor Controls — the panel slot typically reserved for a compact inverter driving a small three-phase induction or permanent-magnet motor. On the distributor line it carries a listed weight of 0.00 kgs — a bare data point rather than a selection parameter, and not the figure to size panel reinforcement or lifting plans against.
Sourcing posture
Compliance documentation for an ABB drive in this class — RoHS, REACH, UL, IEC — is not carried on this line and is pulled from the official ABB documentation pack on request when the order is specified.
Integration checklist
Specifying engineer notes: confirm the frame matches the motor kw/hp rating and the line voltage before issuing the PO, then check the motor cable length against the drive's dV/dt and reflected-wave limits — long pigtails on unfiltered outputs are the usual cause of early winding insulation breakdown on small-frame inverters. Mount the drive with the recommended clearances for airflow, ground the panel end of any shielded motor cable only, and keep the analog reference tied to the drive's own ground bar to keep common-mode noise out of the speed reference.