The ABB ACS355-03E-02A4-2 sits in the ACS355 series of compact module-format drives, sized for cabinet building rather than wall mounting, in the R1 frame at 70 mm wide, 239 mm tall, and 161 mm deep, weighing 1.7 kg. Input is three-phase at 200-240 V, 50/60 Hz.
Two analog inputs, one analog output, and a 5/1 digital I/O count define the field wiring envelope; MODBUS is the onboard protocol, with no second bus listed, so a comms expansion card would be a separate BOM line if the machine needs PROFINET or EtherCAT. IP20 open type confirms panel-installation only — the unit has no inherent protection against falling debris or washdown, so the cabinet envelope and the gland plate arrangement carry the environmental rating. The 50/60 Hz input is the line frequency the rectifier stage accepts, not the output frequency range the drive can synthesise at the motor terminals.
On the common sourcing confusion
The ACS355-03E-08A8-4 and ACS355-03E-02A4-4 siblings are 380-480 V input parts in the same R1 frame; they are not drop-in alternates for a panel wired for 200-240 V three-phase, and a value-engineering swap will fail the input-voltage check before the motor ever spins.
Sourcing posture
The ACS355-03E-02A4-2 is specified into the BOM against an RFQ; standard lead runs in the 1-10 working-day range quoted to order.