Frame and panel fit
Chassis weight is 1.36 kg, which puts it in the wall-mount micro-drive handling class — one-handed hang on the DIN plate, no lifting aid needed, but the cabinet still wants a proper grounding bond at the drive's PE terminal before the line side is energized. At 1.36 kg the thermal mass is modest, so the cabinet layout should leave the manufacturer-specified clearance above and below the heatsink; a drives row stacked tight without that gap will derate the output current long before the nameplate rating is reached.
Where the ACS355 class is applied
The ACS355 line is built for low-power single-motor applications — fans, pumps, conveyors, mixers and similar constant- or variable-torque loads where the drive is sized to one motor and lives close to it on the machine, not in a deep MCC lineup. For those loads the practical watch-items are motor cable length (reflected-wave dV/dt on long unshielded runs), switching frequency versus audible motor noise, and the EMC behavior of the line filter stage — those are the parameters that decide whether the drive survives its first year on the machine, not the headline current number.