What this drive is on the BOM
The ACS510-01-072A-4 is a wall-mounted inverter drive specified for 380 - 480 V supplies at 50 - 60 Hz, sitting in the standard ACS510 three-phase industrial voltage window. It occupies the standard ACS510 frame at 45 x 27 x 60 cm, which is the same cabinet footprint carried by the 060A-4 and 125A-4 siblings, so a panel designed around this enclosure class doesn't need to be reworked to accept either adjacent rating.
Panel-side fit and handling
Wall-mount the unit with clearance for the supply and motor cabling routed through the gland plate; the 45 x 27 x 60 cm envelope is the dimension a panel builder needs to reserve on the back plate, not the bolt footprint alone. Unit mass is 26.5 Kg with a 28 Kg shipping weight, so the mounting surface and any single-person lift on site should be planned for a drive in this class — this is a two-handed panel component, not a DIN-rail snap-on. Strip and termination practice on the power terminals should follow the torque figures in the ACS510 installation guide for this frame; verify supply and motor cable lengths against the drive's reflected-wave limits before energizing.
Where it sits in the ACS510 frame lineup
The ACS510-01-060A-4, by contrast, shares the same 45 x 27 x 60 cm enclosure and the same 26.5 Kg unit mass as the 072A-4, so it is the natural cross-shop candidate when an adjacent current rating is acceptable — the panel cutout, bolt pattern, and supply wiring land on the same terminals.