The ABB ACS510-01-125A-4 is an inverter drive in the ACS510 family, built for wall-mounting in a 380 - 480 V supply fed at 50 - 60 Hz — the standard industrial three-phase window, so it drops onto the same feeder as the rest of the line. Footprint is 45cm x 27cm x 60cm with a listed weight of 38.5 Kg, which sets the panel layout: this is a mid-frame chassis that needs the wall-bracing rated for a heavy drive, not a shelf-mounted unit.
380 - 480 V at 50 - 60 Hz is the working envelope — drives outside that window need a different order code, not a parameter change. Shipping weight is listed at 40 Kg against a unit weight of 38.5 Kg; small delta, but worth flagging on the receiving dock so the handling spec lines up with the lifting gear.
Same-frame siblings — the drop-in question
The ACS510-01-060A-4 and ACS510-01-072A-4 share the 45cm x 27cm x 60cm chassis of the 125A-4, so the panel cutout and mounting pattern are unchanged — only the rating steps between them differ. Listed weight drops to 26.5 Kg on the 060A-4 and 072A-4 (shipping 28 Kg), so a spare pulled from a 125A-4 BOM into a 060A-4 slot will fit mechanically but is not a same-current substitute — confirm the motor rating before swapping.
Lead time and sourcing posture
Lead time is listed at 6 - 10 weeks, so this belongs on the BOM freeze early, not in the line-down cabinet — and any spare held for the line should be ordered against that window, not pulled at the moment of failure.