What lands on the BOM line
The ACS550-U1-023A-4: The 11 kW / 23 A figure on the nameplate is the figure that actually sizes the feeder breaker, the line reactor, and the output cable — not the family headline. Specifying this drive commits the panel to a 380-480 V supply class, so verify the bus on the line side matches before dropping it into a retrofit slot.
Where the class fits in a process line
Drives in this current and voltage bracket are the workhorse units behind pump, fan, and conveyor motors in water/wastewater, HVAC, and general industrial process skids. The 50/60 Hz input window means the same cabinet design travels between 50 Hz IEC sites and 60 Hz NEMA sites without re-engineering the line filter.
Handling and panel fit
The unit comes in at 9.07 kg — a two-person lift onto a backpan is comfortable, and the NEMA 1 chassis does not need a separate cooling fan slot in the cabinet door. Plan the gland plate cutout for the power cable entry below the drive so the line and motor leads land on the right terminal block without cross-overs.
Sourcing posture
The ACS550-U1-023A-4 is specified against the BOM by its full order code — ACS550-U1-023A-4 — and quoted to order against an RFQ. Build the line item with that string exactly; ABB option suffixes (B055, L512, etc., as seen on the 072A-4+B055+L512 sibling) change the chassis and fieldbus fit, so do not collapse variant suffixes when you submit the buy.