The drive on the order code
The ABB ACS580-01-062A-4 is a wall-mount frequency converter in the ACS580-01 series, sized for 380–480 V three-phase supplies at 50/60 Hz, with a net weight of 20 Kg and an IP21 enclosure rating. It is a compact 062A frame, not a panel-floor cubicle — designed to hang on a control-room wall or inside a clean cabinet. Footprint is 25.7 cm wide x 20.3 cm deep x 63.6 cm tall — the tall, narrow wall-mount profile, not the bookcase footprint of the larger frames. One person can handle the 20 Kg net package at install; shipping weight runs 22 Kg.
What the ratings actually decide
IP21 is the load-bearing number for where this drive lives. It is finger-safe and drip-proof over the vertical face, which is the contract for an indoor control panel or a wall in a switchroom — not for a wet area, not for an outdoor canopy, not for a hose-down cell. Mount it where condensation and wash water cannot reach the vents. 1000 m is the rated altitude. Above that, the thermal curve bends — the same heatsink dissipates less air at lower density, so continuous output current drops. For sites between 1000 m and the derate ceiling, plan the output current headroom before specifying motor cable length and brake resistor duty. 69 dB(A) is the acoustic floor with the cooling fan at full speed. In an open control room next to an operator station, that is noticeable but not loud; in a quiet lab or a noise-rated cell, treat it as a switchgear-room-only drive, not an office-wall drive.
How it sits next to the 246A frame
The closer siblings for second-source thinking are the ACS580-01-065A-4 in the same wall-mount series at 19.05 Kg, and the older ACS550-U1-096A-4 at 19.96 Kg from the prior-generation ACS550 line. Same wall-mount character, same general mains envelope, but they are not pin-compatible — treat them as a same-family fallback, not a same-slot swap.
Sourcing the 062A frame
The wall-mount 062A sits in the active ACS580-01 catalogue band; no last-time-buy signal is on the order code itself. Build a quote request with the order code ACS580-01-062A-4, the 380–480 V three-phase rating, and the wall-mount IP21 specification. The distributor desk needs those three lines to confirm a same-frame, same-supply configuration and to lock the mounting kit and gasket set to the 062A outline.