The ABB ACS800-01-0016-3+E202 is a wall-mount AC drive from the ACS800-01 series, classed as a Motor Drive under the broader Drives and Motors & Motor Controls tree (–, –). The +E202 suffix is part of the order code as configured by the buyer, and the unit ships as an ABB-branded drive carrying the ASEA BROWN BOVERI marking. On the handling side, the drive lists at 5.86 kg — a one-person lift for panel mounting rather than a rigging job, but worth confirming the cabinet rails and the mounting footprint match the ACS800-01 frame before the swap goes in. Beyond the part identity and that single weight figure, no further functional ratings (voltage class, current rating, horsepower, overload, IP, or fieldbus option) appear in this evidence bundle, so sizing and parameter work belongs back on the nameplate and the ABB manual, not on a bare distributor line.
Where this class of drive sits
ACS800-01 units are wall-mount industrial AC drives used to run induction and permanent-magnet motors on a line — sizing, braking, EMC and fieldbus all come out of the same parameter set the installer downloads into the drive during commissioning. With this listing carrying only the order code, the brand, the class placement and a 5.86 kg mass, the procurement decision has to lean on the order code itself and the configured suffix +E202 rather than on any headline electrical rating pulled from this record.