The ABB ACS800-01-0025-3+E200+P901+P915 is a wall-mount AC drive from the ACS800-01 series, ordered as the base 0025-3 frame with the E200, P901 and P915 options stacked into the plus-code — a common config for industrial panels that needed the legacy ACS800 firmware/macro behaviour preserved while pulling in fieldbus or I/O extensions from the option list. The drive ships as a self-contained enclosure rated for floor-mounting against a panel backplate, weighing 13.61 kgs, which is enough mass that a two-person lift onto the backplate is the realistic install posture rather than a solo carry.
Where the ACS880 successor sits against this part
The closest same-function successor in the ABB catalogue is the ACS880-01-034A-5, listed in the same Motor Drives category and built on the newer ACS880 platform with the common drive architecture. The two are not panel-swappable: the ACS880-01-034A-5 weighs 10.43 kgs against this drive's 13.61 kgs, the footprint and terminal layout shifted between generations, and the firmware/macro structure changed — so a panel wired for an ACS800 will not accept an ACS880 without rewiring and a parameter re-load, even though both are wall-mount industrial AC drives. Treat the ACS880 as the new-build replacement, not as a literal drop-in for an existing ACS800-01-0025-3+E200+P901+P915 slot.