What the part is on this line
The ABB ACS800-01-0030-3 is the -0030-3 frame in the ACS800-01 wall-mount AC drive family, listed under Motors & Motor Controls as a Motor Drive and tagged as an AC DRIVE on the line description. On the bench the unit registers 11.79 kg, which puts it in wall-mount handling range — a single tech can shoulder it onto the backplate, but the mount should still be sized for that mass rather than treated like a small drive. The order code on this line is ACS800-01-0030-3, listed as an AC DRIVE under ASEA BROWN BOVERI on the spec row.
Sourcing reality and what the ledger actually says
The only lifecycle entry on this row is the ABB brand attribution — there is no production-status, last-time-buy, or official successor code carried here, so the close stays qualitative and the drive is quoted to order against an RFQ rather than declared active or obsolete.
Where the ACS800-01 class actually lives
The ACS800-01 wall-mount form factor is the standard cabinet-mount VFD used to run 3-phase induction and PMSM motors in industrial panels — fan/pump stations, conveyors, mixers, and extruder auxiliaries are the typical loads at this frame size. At 11.79 kg this drive needs real panel real estate: leave clearance for the heatsink airflow path above and below, and treat the wall anchors as load-bearing, not decorative, because the mass concentrates at the backplate rather than spreading across a deep enclosure.