What landed on the BOM line
The ACS800-04-0011-7: Within the ABB motor drives family the ACS800-04 sits as the compact wall-mount form factor of the ACS800 generation, used for variable-speed control of induction and permanent-magnet motors in industrial cabinets; this is the class context for sourcing or specifying a replacement, not a rating that the entry itself lists.
Commissioning and EMC posture for this frame
Wall-mount drives in this class want the line cable short and the PE bond low-impedance back to the cabinet ground bar — the panel entry point is where common-mode currents get shed, and a long pigtail from the gland plate back to the drive chassis will couple that noise straight into the analog feedback and encoder lines. The ACS800-04 frame accepts a DC-link braking resistor or line filter on the same plane without forcing a derate curve on the drive's thermal envelope.
Sourcing posture
The ABB ACS800-04-0011-7 is specified into the BOM and quoted to order against an RFQ — the order code is the contractual reference for the panel builder and the integrator, and the frame's 10.89 kgs mass class confirms the wall-mount handling assumptions used in the original panel layout.