What this order code puts on the floor
The ABB ACS800-04-0030-3+E200+J400 is the wall-mount ACS800-04 family drive: a single configurable unit sized into a panel slot, carrying the +E200 and +J400 option suffixes directly in the order code so the firmware / option set ships factory-fixed and does not have to be re-applied at commissioning.
Integrator's view — slot, wiring, commissioning rhythm
Drop it onto the same DIN cut-out pattern the ACS800-04 frame uses; the control terminals and power terminals stay segregated on this drive family, so keep the analog feedback cable on the opposite gland from the motor output to keep common-mode noise out of the encoder / resolver channel. Commissioning runs through ABB's standard ACS800 parameter tree; the +E200 / +J400 suffixes lock the application macro and the option slot configuration at order time, so a swapped fieldbus card still has to be re-mapped rather than re-ordered — confirm the macro label on the drive nameplate against the BOM before first power-up.
Panel and handling considerations
Listed mass is 10.89 kg, which puts it in the bracket where a single technician can shoulder the unit but should not — use the lifting eye or a second pair of hands, and torque the mounting bolts to the frame pattern rather than the cabinet skin so vibration does not loosen the skin over time. Around the drive, leave the rear clearance the platform expects; the cooling profile on the ACS800-04 family is designed for front-intake / rear-exhaust airflow, and crowding the back of the cabinet derates the unit well before any parameter alarm fires.
Sourcing posture
BOM lines for the ACS800-04-0030-3+E200+J400 are typically specified into the requisition with the +E200 / +J400 suffixes preserved verbatim — any change to those suffixes alters the factory build, so the part ships quoted to order against an RFQ rather than off the shelf.