What the order code actually is
The ABB order code ACS800-DEMAG-01-0005-3+B056+E200+0J400+L501+L502+N672 identifies a configured drive in the Motors & Motor Controls → Drives → Motor Drives class. The plus-code options are order-entry choices that cannot be added by firmware alone, so the full code belongs on the PO and the nameplate cross-check.
Where the ACS880 platform sits as a peer
For a panel that was specced around the ACS880-01-07A6-5 — a same-class drive on the current platform at 6.35 kgs — the ACS800-DEMAG-01-0005-3 is NOT a direct mechanical drop-in: the ACS800 and ACS880 differ in control-panel layout, fieldbus slot mapping, and parameter ID structure, so a swap is a commissioning job (parameter restore, I/O map re-check, safety/STO circuit re-validation) rather than a wiring-only change. The ACS880-01-07A6-5 is best treated as a cross-shop candidate when the panel can absorb a re-commission, not as a same-footprint alternate.