What it is and what it ships as
The ABB ACS800-U1-0030-7 is a wall-mount AC drive from the ACS800 family, sold under the ASEA BROWN BOVERI part number ACS800-U1-0030-7 and classed under Motors & Motor Controls › Drives › Motor Drives. The U1 suffix marks the wall-mount / cabinet-build form factor within the ACS800 line, sized to sit alongside the contactor and braking-resistor stage in a motor-control panel rather than in a free-standing floor cabinet.
Cabinet-side fit notes
The chassis lists at 11.79 kg, which is the figure the installer feels on the lifting bar when the unit goes into the cabinet — it is handling mass, not a selection rating. Plan the DIN/panel cut-out and lifting aid around that weight, and keep the cooling clearances the ABB ACS800 manual calls out so the drive is not the bottleneck in a packed enclosure.
Sourcing posture and the spare-on-the-shelf question
For a maintenance-spares buyer the real question on this order code is whether the drive can be held as a critical spare before it fails. The ACS800-U1 frame is no longer the active flagship in ABB's low-voltage line, so the practical channel is independent industrial-automation supply quoted to order against an RFQ — not a same-day shelf pickup. If a furnace or process line is running on this drive today, locking one ACS800-U1-0030-7 into the spares cabinet is the move that keeps a six-week lead time from idling the asset; running the line with no spare in the cabinet is the failure mode that turns a sourcing gap into a production stop.
Closing the BOM line
Order code ACS800-U1-0030-7 from ABB is the correct reference for the BOM line, with 11.79 kg as the handling figure the panel builder needs. Send the RFQ against this exact string so the quote comes back on the same drive, not a parametric look-alike from a different ACS800 frame.