Configured ACS800-U1 drive, ready for RFQ
The ABB ACS800-U1-0205-5+D150+E210+L502+P901 is the wall-mounted ACS800-U1 family AC drive, ordered with the +D150, +E210, +L502 and +P901 option codes built into the same string rather than as loose add-ons. It carries a shipping mass of 67.13 kgs, which is the figure that drives lift, crate and panel-mount rigging decisions on receipt rather than electrical fit. Listed under ABB's Motor Drives line, so it ships and is documented as a standard industrial low-voltage drive package from that family.
Where this class of drive lands
ACS800-U1 wall-mount drives are the workhorse form factor for direct-on-line cabinet retrofits and machine skids where a higher-IP standalone cabinet is required but a cabinet-build inverter module is too small. Configured units with option suffixes (+D150/+E210/+L502/+P901) are typically specced into the BOM up front rather than retrofitted in the field, because the option cards are factory-installed and the resulting code string is what the panel builder wires and labels against.
Sourcing posture
Configured ACS800-U1 units with this option set are quoted to order against an RFQ; the BOM line is held against the exact string ACS800-U1-0205-5+D150+E210+L502+P901 so the factory build matches the option cards on the nameplate. There is no lifecycle status on file for this code in the current evidence, so production posture is not asserted here; the decision a buyer can act on is the exact-code match, not a status claim.