The module and where it sits in the cabinet
The ACS80010700113: The ABB ACS800-107-0011-3 is a multidrive inverter module from the ACS800 platform, designed to ride on a common DC bus rather than rectify its own mains — input is 513-560 V DC and the inverter synthesizes 0-415 V 3-phase at the motor terminals, sized for a 7.5 kW continuous load at 19 A output current. Output frequency spans 0-300 Hz, which covers standard four-pole induction duty and pushes into high-speed spindle territory if the mechanical side is up to it; the 0 V lower bound means the module can hold zero-speed torque with the encoder option fitted. Internally the unit carries ABB code 64752464, mirrored in the Order Code field — keep the same string on the PO line so receiving can match the nameplate against the BOM without a re-quote.
What the ratings actually buy you on the BOM
19 A continuous output at 7.5 kW continuous is the line that sizes the motor — pair this against the motor's rated current on the nameplate, not the motor's kW, because the inverter governs thermal limit, not the motor's mechanical rating. The DC-bus input window of 513-560 V DC tells the upstream supply unit how it must regulate; under-voltage on the bus trips the module off and the line coasts.
Handling and mounting
Module mass is 9,04 kg per the spec row. Plan cabinet layout for heat rejection across the multidrive row and clearance around the DC-bus bars.
Sourcing posture
Specified into the BOM to order against an RFQ — the unit is supplied through the used and surplus channel, so lead time and documentation pack vary with the source; ask for a nameplate photo and the internal code (64752464) at quote time to lock the BOM line.