What you are sourcing
The ABB ACS800704064070F sits in the PLC expansion module class under the ASEA BROWN BOVERI catalog line, filed as PLCs & HMIs › PLCs and Accessories › PLC Expansion Modules, so the BOM row goes against an expansion slot rather than a base PLC. Listed weight is 14.51 kgs — a multi-kilogram device, which means two people on the lift and a cabinet frame that has been specced for that load before the module goes in.
Cabinet load and what 14.51 kg actually implies
At 14.51 kgs this is not a DIN-rail snap-on; the panel layout has to assume a heavier module class, with mounting brackets and rear-surface support sized accordingly rather than relying on standard DIN rail alone. Same-class ABB peers on the shelf read lighter — K6M8 at 4.08 kgs, DAI-05 at 2.27 kgs, and APBU-44C at 1.07 kgs — so a swap into a cabinet originally specified around one of those slots is a panel-load question first and a wiring question second.
Panel-builder wireman note
Order code on the nameplate and on the PO line is ACS800704064070F — match that string exactly when raising the requisition, since ABB expansion modules in this class share prefixes across families and a near-match lands on the wrong slot. Sub-category reads PLC Expansion Modules, so the unit is intended to extend an existing PLC backplane or I/O island rather than stand alone; confirm the host controller's expansion port count and firmware revision against the module's own compatibility list before commissioning.