The ABB ACS880-01-027A-5 is a wall-mount AC drive from the ACS880-01 series, filed in the Motor Drives line for cabinet-mounted single-drive applications on induction or permanent-magnet motors. On the panel layout the 10.41 kgs mass lands in the one-person-lift bracket; verify the cabinet depth and enclosure thermal budget before finalizing the BOM.
Frame uprate — 034A is not a drop-in for this rating
The adjacent ACS880-01-034A-5 sits in the same frame with a near-identical 10.43 kgs mass, but the -034A suffix is a higher current rating — a panel cut around 034A cannot accept -027A-5 without re-checking motor current, overload headroom, and the drive's parameter set. Treat 034A as a second-source candidate for sizing only when the motor nameplate current falls inside the -027A-5 envelope; the suffix is the rating code, not a cosmetic difference.
Hot-strip-mill fit — what a heat-soaked cabinet looks like
On a hot-strip mill the cabinet sits near the coiler or roughing stand, and the ACS880-01-027A-5 is a wall-mount frame sized to live inside a forced-air enclosure where ambient stays at the level the ABB ACS880 platform is rated for; mounting close to the motor keeps cable loop impedance down and keeps the drive's own radiated EMI away from the analog tensiometer loop. Grounding practice matters here: bond the drive's PE terminal to the cabinet back-panel with a short, flat braid so the high di/dt from the IGBT stage has a low-impedance return — that is what keeps the DC-link ripple from coupling into the strip tension feedback.