What the order code actually is
The ABB ACS880-01-240A-5+J425+K458+N2008+P944 is a configured three-phase drive in the ACS880-01 series, carrying the +J425, +K458, +N2008, and +P944 option bundle. Listed mass is 47.63 kg, which is the figure that drives lift-assist and panel-reinforcement decisions at install time — this is not a small-format drive and should be planned as such.
Sizing and application fit
The ACS880-01-240A-5+J425+K458+N2008+P944 is the 240 A frame unit in the ACS880-01 series; the +J425, +K458, +N2008, and +P944 codes are option-bundle suffixes, not a power-stage change. For panel builders, the practical constraints are cooling clearance, line-side cabling, and motor-cable length — long motor leads from a 240 A frame demand attention to reflected-wave dV/dt at the motor terminals, which is the usual failure mode when the drive is oversold beyond its cable-length limits.
Cross-shopping within the ACS880-01 frame
The ACS880-01-156A-5 is the same-series, same-form-factor step down in current; it is a true same-frame alternative, not a same-MPN — the panel footprint and I/O map carry over, but the motor sizing shifts and the 55.00 kg figure on that variant reflects a different chassis option.
Sourcing posture
Configured ACS880-01 codes are specified-to-order against the option bundle, so the practical sourcing move is to RFQ the exact +J425+K458+N2008+P944 string rather than approximate it with a base-code spare.