Skip to main content
ABB ACS880-04-635A-5+D150+H356 — AC Drive (VFD) 480V

ABB ACS880-04-635A-5+D150+H356 Drive, 480 VAC

MPNACS880-04-635A-5+D150+H356

ABB ACS880-04 series low-harmonic single-drive module, order code ACS880-04-635A-5+D150+H356, 480 VAC input, 5.90 kgs.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

ACS880-04-635A-5+D150+H356 — Specifications
ParameterValue
Weight5.90 kgs

Product details

What the order code identifies

The ABB ACS880-04-635A-5+D150+H356 is a motor drive in the ACS880-04 single-drive family, ordered with the +D150 and +H356 option suffixes bundled into the line code. It is catalogued as a Motor Drive under ABB's Drives category, with an input voltage rating of 480 VAC.

Reading the headline ratings

The 480 VAC input rating is the headline electrical spec on the listing, so this build is matched to a 480 V supply. The 5 in the voltage code position is the 480 V class identifier on ACS880-04 ordering; the 04 in the family position is the single-drive format for this product line. At 5.90 kgs the module is light enough to be carried onto a backplate by one person with a panel-mount kit, so handling and lift planning do not need a rigging step on the install. That mass figure is the bare drive; option cards, control panels and any line-side reactor sit outside this number on the BOM line.

Where this class of drive sits in the panel

ACS880-04 drives are wall-mount low-harmonic units used where a cabinet-mount or cabinet-built ACS880 is too large but passive harmonic mitigation alone will not pass the site harmonic target. The +D150 and +H356 suffixes on this specific build are part-number modifiers that must be carried into the purchase order and the replacement spares — substituting a base ACS880-04-635A-5 loses those options at first power-up, so cross-references need the full suffix string, not the bare frame code.

Family context against ACS880-01 siblings

The ACS880-01 family is the cabinet-built general-purpose sibling — listed ACS880-01-07A6-5 at 6.35 kgs, ACS880-01-11A0-5 at 4.54 kgs and ACS880-01-021A-5 at 7.71 kgs. Those are a different mechanical format than the ACS880-04 wall-mount format on this listing, so a panel laid out around an ACS880-01 will not accept this drive without a footprint and depth review.

Sourcing posture

This is built to order against an RFQ — the +D150 and +H356 options configure the unit at the factory, so a quoting line item carries the full option string rather than a base catalogue code. Brand is ABB; full MPN is ACS880-04-635A-5+D150+H356.

Frequently asked questions

What is ACS880-04-635A-5+D150+H356's listed part number on this Motor Drives line?

The listed part number is ACS880-04-635A-5+D150+H356, an ABB ACS880-04 low-harmonic single-drive build at 480 VAC input.

What is ACS880-04-635A-5+D150+H356's listed weight on this Motor Drives line?

The listed weight is 5.90 kgs for the bare drive module; option cards, keypad and any external reactor sit outside that figure.

Will ACS880-04-635A-5+D150+H356 drop into a panel that was specified around ACS880-01-07A6-5 without rewiring?

No. The ACS880-04-04 is a wall-mount low-harmonic format and the ACS880-01-07A6-5 is a cabinet-built general-purpose unit — different mechanical footprint, depth and harmonic topology, so the panel cut-out, gland plate and line-side wiring need a fresh review before swap-in.

MPN
ACS880-04-635A-5+D150+H356