Skip to main content
ABB 1SAM101901R0002

ABB 1SAM101901R0002 Auxiliary Contact, 2NO, 3 A, 400 V

MPN 1SAM101901R0002

ABB 1SAM101901R0002, auxiliary contact block, 2NO contacts rated 3 A at 400 V, 9 mm DIN-rail width for MS / MO-class manual motor starter front mounting.

$5.09 – $8.38 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SAM101901R0002 specifications
ParameterValue
Voltage400 V
Current3 A
Width9 mm

Product details

The ABB 1SAM101901R0002 is a front-mounted auxiliary contact block rated 3 A at 400 V with a 2NO contact configuration, sized at 9 mm wide so it drops onto the stack of an MS or MO manual motor starter without consuming an extra DIN module.

Reading the ratings for fit

The 3 A / 400 V envelope is the low-power control-side number, not a power-pole rating — it carries the status, run, or interlock signal off the starter, not the motor load itself, so the real fit check is the contactor's coil current and the downstream relay or input card, not the motor FLA. At 9 mm the block preserves the panel-builder's module count, which is the constraint that usually decides whether the BOM stays frozen or has to be re-issued for width — confirm the host starter's accessory slot before specifying, since that slot is what fixes whether this 9 mm form factor seats cleanly.

Sibling contrast — where the 1NO+1NC part splits

The same-family part 1SAM101901R0001 shares the 9 mm width, 3 A rating, and 400 V ceiling, but ships as 1NO + 1NC, so it is the right second-source only when the wiring diagram calls for a normally-closed contact — using it as a drop-in for a 2NO schematic leaves a circuit that never closes through the NC pole, which is a real operational difference rather than a paperwork one.

Sourcing posture and documentation

Compliance documentation against the usual industrial control standards is handled through the ABB declaration pack supplied with shipment; the order code itself does not carry separate certification fields on this listing, so the decl-of-conformity and any applicable IEC / UL markings are read off the paperwork, not the part number string.

MPN
1SAM101901R0002