Skip to main content
ABB EHDB220C-1L

EHDB220C-1L 220A 3-Pole DC Drive Contactor, 120VAC Coil

MPN EHDB220C-1L

A-Line series 3-pole DC drive dynamic braking contactor, 220 A, 300 VDC, with 120 VAC coil, 2 NO + 1 NC plus 1 NO + 1 NC auxiliary contacts.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

EHDB220C-1L specifications
ParameterValue
Voltage300 V
Current220 A
Poles3

Product details

The EHDB220C-1L is a 3-pole DC drive dynamic braking contactor from the A-Line series, rated 220 A and 300 VDC, with a 120 VAC coil. It includes 2 normally open and 1 normally closed main contacts, plus 1 NO and 1 NC auxiliary contact set.

The 220 A continuous rating governs the main power path — sized for a DC drive's armature or field circuit where the braking resistor dumps energy back. The 300 VDC rating means it safely interrupts the DC bus voltage during a dynamic braking event; DC arc extinction is harder than AC, so that 300 VDC figure is the limiting voltage for this contactor's application. The 120 VAC coil voltage is standard for North American control panels running off a 120 V control transformer. The 3-pole configuration (2 NO + 1 NC) lets one pole switch the braking resistor while the other two isolate the drive output or provide a pre-charge bypass — common in DC drive retrofit and decommissioned-line pulls.

Mounting type is Device — meaning it's a panel-mount contactor, not a DIN-rail snap-on. The auxiliary contacts (1 NO + 1 NC) are built in, so no separate aux block is needed for status feedback to the PLC or drive controller. The 120 VAC coil ties directly to the control transformer secondary; verify the coil suppression matches the drive's I/O card if the PLC output drives the contactor directly.

MPN
EHDB220C-1L