Skip to main content
ABB S201MUC-K60

ABB S201MUC-K60 MCB, 1P, 60 A, Curve K, 277 VAC

MPN S201MUC-K60

ABB S200MUC series, S201MUC-K60, 1-pole miniature circuit breaker, 60 A, Trip Curve K, 277 VAC / 250 VDC, 6 kA interrupting rating AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

S201MUC-K60 specifications
ParameterValue
Product typeTrip Curve K
Voltage250 V
Current60 A
Breaking capacity6 kA
Poles1
MountingDIN Rail

Product details

Rated 60 A, Curve K — what it means on the panel

On a DIN-rail panel, that 60 A rating carries motor and inductive loads where the inrush is higher than a resistive heater but lower than a transformer — Curve K trips between 8 and 12 times rated current, so a 60 A breaker holds through a 480–720 A peak long enough for a motor start but clears a hard short before the cable insulation melts. The interrupting capacity is 6 kA at 277 VAC and 10 kA at 250 VDC. That 6 kA AC figure is standard for downstream distribution in a panel fed by a larger upstream device — it clears a bolted fault within its rating without welding the contacts, but needs coordination with the branch feeder if the available fault current exceeds 6 kA.

Single-pole footprint saves one module width over a 2-pole equivalent — relevant when filling a sub-distribution board or a control panel where every 18 mm slot counts.

MPN
S201MUC-K60