Skip to main content
ABB S203P-C20

ABB S203P-C20 MCB, 3P C 20A, 10 kA

MPN S203P-C20

ABB S203P-C20, 3-pole miniature circuit breaker, 20 A, Trip Curve C, 277 VAC, 10 kA interrupting capacity, DIN rail mount.

$39.37 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

S203P-C20 specifications
ParameterValue
Product typeTrip Curve C
Current20 A
Breaking capacity10 kA
Poles3
MountingDIN Rail

Product details

What this MCB is and where it fits

The ABB S203P-C20 is a 3-pole miniature circuit breaker rated 20 A with Trip Curve C, interrupting 10 kA at 277 VAC. It snaps onto a DIN rail inside a distribution board or control panel, protecting branch circuits against overload and short-circuit faults. The C-curve characteristic means it trips between 5× and 10× rated current — the standard choice for moderate inrush loads like small motors, transformers, and lighting banks where a B-curve would nuisance-trip on startup.

Ratings and what they mean for coordination

The 20 A rating sets the continuous load limit — size the upstream conductor and any downstream load for no more than 20 A continuous. The 10 kA interrupting capacity at 277 VAC tells you this breaker can safely clear a fault current up to that level without welding contacts or rupturing the case. In a panel with an available fault current below 10 kA, it coordinates cleanly; above that, you need a current-limiting upstream device or a higher-rated breaker. The 277 VAC rating matches North American 480Y/277 V wye systems — the breaker protects line-to-neutral loads on a 277 V leg.

Panel integration note

DIN-rail mount: clips onto standard 35 mm DIN rail in any enclosure. Three-pole form factor occupies 3 module widths (approx 54 mm). No special busbar or comb needed for the line side — standard pin busbars fit the tunnel terminals. Wire range typically 1–25 mm² solid or stranded; torque to the value printed on the breaker face.

MPN
S203P-C20