Skip to main content
Siemens 3RW4444-2BC44

Siemens 3RW4444-2BC44 SIRIUS Soft Starter, 433 A, 690 V

MPN 3RW4444-2BC44

Siemens SIRIUS 3RW4444-2BC44 soft starter, 433 A at 40 °C, 690 V insulation voltage, 50/60 Hz, thyristor-based, inside-delta circuit, screw fixing, IP00.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW4444-2BC44 specifications
ParameterValue
Mountingscrew fixing
Depth298 mm
Width210 mm
Height230 mm

Product details

Current rating and thermal derating — what the 433 A means in a real panel

The 3RW4444-2BC44: The minimum load setting of 8 % avoids nuisance trips on lightly loaded motors or pump-off conditions — a wider adjustment range than many competitors' 10–15 % floor.

Thyristor topology and inside-delta wiring — why it matters for high-inertia starts

Built around thyristors with an inside-delta circuit, this soft starter switches only the phase legs inside the delta winding — the line current is lower than the motor full-load current, reducing cable and contactor sizing upstream. The inside-delta configuration also halves the thyristor current stress compared to a standard line-fed soft starter, making it a good fit for high-inertia loads like conveyors, crushers, and centrifuges that demand extended ramp times.

Mounting and cable entry — panel layout constraints

Dimensions are 298 mm deep, 210 mm wide, 230 mm high — fits a standard 600 mm deep enclosure with room for the main cables and bending radius. Main circuit cables accept stranded 70–240 mm² or finely stranded 50–240 mm²; the busbar connection option simplifies parallel feeds for the 433 A rating. Mounting position allows vertical surface installation with ±90° rotation and ±22.5° tilt — useful when the panel layout forces an angled or upside-down orientation. Clearance requirements: 100 mm above, 75 mm below, 5 mm at the sides — the tight side clearance lets you pack multiple starters in a row.

MPN
3RW4444-2BC44