Skip to main content
Siemens 3RW5073-2TB15

Siemens 3RW5073-2TB15 SIRIUS Soft Starter, 100 A Min

MPN 3RW5073-2TB15
Active

Siemens SIRIUS 3RW5073-2TB15 soft starter, 100 A minimum rated current, 200–600 V rated voltage, ATEX/UKEX/IECEx hazardous-area approved, PROFIBUS/Modbus RTU-TCP/EtherNet/IP communications, screw-fixing mount, 282 mm depth.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5073-2TB15 specifications
ParameterValue
Mountingscrew fixing
Depth282 mm
Width160 mm
Height230 mm
Trip classCLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

The 3RW5073-2TB15 is a SIRIUS soft starter rated for a minimum load current of 100 A — that is the smallest settable Ie, not the maximum. The rated voltage span is 200 to 600 V, covering 208 V and 480 V common in North American panels as well as 400 V IEC installations. Trip class is CLASS 10A / 10E (preset) / 20E per IEC 60947-4-2, meaning it protects standard and heavy-start motor loads without nuisance tripping on longer acceleration ramps. Screw-fixing mount, 160 mm wide, 230 mm tall, 282 mm deep; clearance requirements are 100 mm upward, 75 mm downward, 10 mm forward, and 5 mm at the sides for airflow and wiring access.

Fieldbus and control options

This soft starter supports PROFIBUS, Modbus RTU, Modbus TCP, and EtherNet/IP natively — no separate communication module required for those protocols. PROFIenergy is available when used with the PROFINET standard communication module, letting the starter participate in energy-management shutdown sequences during idle periods. Remote reset is possible by cycling the control supply voltage. The unit also supports auto-reset, soft torque, voltage ramp, and pump ramp-down functions — useful for reducing water hammer in pump starts and stops. There is no analog output and no torque control; the HMI-High Feature is not included.

MPN
3RW5073-2TB15