Skip to main content
Siemens 3RW5075-2TB15

Siemens 3RW5075-2TB15 Soft Starter, 160 A, 200-600 V, ATEX

MPN 3RW5075-2TB15
Active

Siemens 3RW5075-2TB15 soft starter, 160 A minimum rated current, 200-600 V operating voltage, Class 10A/10E/20E trip, ATEX and IECEx approved, PROFIBUS and Modbus RTU/TCP enabled.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5075-2TB15 specifications
ParameterValue
Mountingscrew fixing
Depth282 mm
Width160 mm
Height230 mm
Trip classCLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

Active production, fieldbus-ready motor starting

The Siemens 3RW5075-2TB15 is a current-production soft starter rated for a minimum 160 A at 200-600 V, designed for three-phase induction motor starting with a preset Class 10A or selectable 10E/20E trip profile per IEC 60947-4-2. It carries onboard PROFIBUS, Modbus RTU, Modbus TCP, and EtherNet/IP interfaces, so it drops into a PLC-controlled line without a separate gateway module.

Trip class and motor protection

The 10E and 20E settings extend the ramp time for higher-inertia loads like centrifuges or crushers. The minimum load setting is 15 % of the smallest settable Ie, so it can start lightly loaded conveyors or pumps without nuisance tripping.

Compliance and approvals for hazardous areas

ATEX and IECEx certified, plus CE, UL, and CSA marks — this unit is panel-ready for Zone 2 / Zone 22 installations and North American 600 V class systems.

Mounting and panel integration

Screw-fixed mounting, 160 mm wide × 230 mm tall × 282 mm deep. Clearance requirements: 100 mm upward, 75 mm downward, 10 mm forward, 5 mm sideways — plan the enclosure depth and cable duct accordingly. Mounting position is vertical, rotatable ±90° or tiltable ±22.5° front-to-back, which gives flexibility in tight retrofit panels.

MPN
3RW5075-2TB15