Skip to main content
Siemens 3RW5225-3AC05

Siemens 3RW5225-3AC05 Soft Starter, 200-600 V, 25.5 A min

MPN 3RW5225-3AC05
Active

Siemens SIRIUS 3RW5225-3AC05 hybrid soft starter, 200-600 V rated supply, 25.5 A minimum operating current, Trip Class 10A/10E/20E, PROFIBUS/PROFINET/Modbus/EtherNet/IP, UL/CSA/CE.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5225-3AC05 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width185 mm
Height306 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

Trip class and motor protection coordination

The 3RW5225-3AC05: Minimum operating current is 25.5 A, which sets the lower bound for motor full-load amps the soft starter can reliably control. Below this threshold, the phase-angle firing may not maintain consistent conduction. Rated supply voltage spans 200 to 600 V AC, covering 208 V, 240 V, 400 V, 480 V, and 600 V networks without an autotransformer. The control supply is 24 V DC, isolated from the power circuit.

Fieldbus integration and commissioning

This soft starter ships with onboard PROFIBUS DP and Modbus RTU, plus support for PROFINET, Modbus TCP, and EtherNet/IP via optional communication modules. The same unit can be specified for a PROFINET island or a Modbus TCP line without a hardware variant change. PROFIenergy is supported when paired with the PROFINET standard communication module, allowing the drive to be put into an energy-saving idle state during production pauses — useful in automotive or machine-tool lines with planned stops. The analog output is configurable as 4-20 mA (default) or 0-10 V, parameterizable via the High Feature HMI. This feeds motor current, power, or thermal-utilization data to a PLC or SCADA without a separate transducer. Firmware can be updated in the field via the communication interface, so protocol revisions or bug fixes don't require swapping the unit.

Mounting, cooling, and environmental limits

Dimensions are 306 mm high, 185 mm wide, and 203 mm deep — a screw-fixed footprint that requires 100 mm clearance above, 75 mm below, 10 mm forward, and 5 mm at the sides for airflow and cable bending radius. Backward clearance is 0 mm, so it can be mounted flush against a back panel. Shock resistance is 15 g / 11 ms, with potential contact lifting above 12 g — relevant for mounting on vibrating machinery skids. Mounting position allows ±10° rotation on a vertical surface, so the unit can be tilted forward or backward slightly to fit existing busbar runs.

Lifecycle and compliance documentation

Carries UL, CSA, and CE marking, so it is accepted in North American and European jurisdictions without additional agency review. The pollution degree 3 rating aligns with IEC 60947-4-2, which is the governing standard for soft starters in industrial control panels.

MPN
3RW5225-3AC05