Skip to main content
Siemens 3RW5235-6TC05

Siemens 3RW5235-6TC05 Soft Starter, 68 A min, 200-600 V

MPN 3RW5235-6TC05
Active

Siemens SIRIUS 3RW5235-6TC05 soft starter, 68 A minimum, 200-600 V, Trip Class 10A/10E/20E, PROFIBUS, Modbus RTU/TCP, EtherNet/IP, PROFINET, 203 x 185 x 306 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5235-6TC05 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width185 mm
Height306 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

What this soft starter covers — motor FLA and voltage range

The 3RW5235-6TC05: Trip Class is selectable between CLASS 10A (default), 10E, and 20E per IEC 60947-4-2. For a motor with a 60-second locked-rotor withstand, CLASS 10A clears before the rotor heats past the insulation class; CLASS 20E gives more headroom on high-inertia loads like centrifuges or crushers.

Fieldbus and control — what's onboard

This soft starter ships with PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET standard communication. No separate gateway module needed for most PLC networks — it talks directly to a S7-1500 or CompactLogix over the same cable. PROFIenergy is supported when used with the PROFINET communication module. That lets the controller put the soft starter into a low-power state during production pauses without cycling the main contactor. Control supply voltage is 24 V DC. Remote reset is possible by cycling the control supply off and on.

Mounting and environmental limits

Dimensions are 203 mm deep, 185 mm wide, 306 mm high. Fastening is screw fixing. Mounting position allows a vertical surface with ±90° rotation and ±22.5° tilt forward/back — useful when the panel layout forces an off-angle installation. Operating temperature range is -25…+60 °C, with derating required above 40 °C. Pollution degree 3 per IEC 60947-4-2 means it tolerates conductive dust and humidity typical in industrial enclosures without conformal coating. Clearances: 100 mm above, 10 mm in front, 0 mm behind, 75 mm below, 5 mm at the sides. The zero rear clearance is handy for shallow back panels.

MPN
3RW5235-6TC05