Skip to main content
Siemens 3RW5236-6AC15

Siemens 3RW5236-6AC15 SIRIUS Soft Starter, 81 A min

MPN 3RW5236-6AC15
Active

Siemens SIRIUS 3RW5236-6AC15 soft starter, 81 A minimum set current, 200-600 V, trip class 10A/10E/20E, PROFIBUS/Modbus RTU/Modbus TCP/EtherNet/IP/PROFINET, 306 x 185 x 203 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5236-6AC15 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width185 mm
Height306 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

Trip class and current setting — what they mean for motor protection

The 3RW5236-6AC15: This soft starter carries a default trip class of CLASS 10A per IEC 60947-4-2, with selectable 10E or 20E for longer ramp times. The minimum set current is 81 A — that is the floor for the motor full-load current you can protect; anything below and the overload curve won't engage properly. Service factor is 1.0 — no built-in headroom for continuous overload above nameplate.

Panel fit and mounting constraints

Dimensions are 306 mm high, 185 mm wide, 203 mm deep — screw-fixing mount, not DIN-rail snap-on. The mounting position allows vertical surface with ±90° rotation and ±22.5° tilt front-to-back. Clearance requirements: 100 mm upwards, 10 mm forwards, 75 mm downwards, 5 mm at the sides, 0 mm backwards. The shock resistance is 15 g / 11 ms, dropping to 12 g / 11 ms if contact lifting is a concern.

Communication and control — fieldbus options

Built-in fieldbus support includes PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET (with PROFIenergy when using the PROFINET standard communication module). Analog output is configurable 4-20 mA default or 0-10 V with the High Feature HMI. Remote reset is possible by cycling the control supply voltage. Auto-reset is enabled. Pump ramp-down and soft torque are standard; torque control is not available. Firmware updates are supported.

MPN
3RW5236-6AC15