Skip to main content
Siemens 3RW5245-2TC15

Siemens 3RW5245-2TC15 SIRIUS Soft Starter, 135 A, 200-600 V

MPN 3RW5245-2TC15
Active

Siemens SIRIUS 3RW5245-2TC15 hybrid soft starter, 135 A minimum, 200-600 V, Class 10A/10E/20E, PROFIBUS/Modbus/EtherNet/IP, screw fixing, 393x210x203 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5245-2TC15 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width210 mm
Height393 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

135 A minimum, 200-600 V — trip class and duty

The 3RW5245-2TC15 is a SIRIUS hybrid soft starter rated for a minimum operating current of 135 A across a supply range of 200 to 600 V (50/60 Hz). Trip class is configurable as CLASS 10A (default), 10E, or 20E per IEC 60947-4-2, giving the commissioning engineer flexibility to match the motor start profile without changing hardware. The unit supports soft torque and pump ramp down, making it suited for centrifugal loads where mechanical shock on start and water hammer on stop must be minimised.

Fieldbus suite and control integration

Onboard fieldbus options include PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET standard, with PROFIenergy available when paired with the PROFINET communication module. Remote reset is possible by cycling the control supply voltage; auto-reset is also supported, which simplifies integration into automated restart sequences after a fault. Firmware update capability is present, allowing field upgrades without replacing the unit.

Mounting and environmental limits

The unit can be rotated ±90° or tilted ±22.5° front-to-back, which aids panel layout in tight enclosures. Clearance requirements: 100 mm above, 75 mm below, 10 mm forward, 5 mm at the sides, and 0 mm backward — critical for airflow and cable entry planning. Shock resistance is 15 g / 11 ms, with potential contact lifting above 12 g / 11 ms.

The 3RW5245-2TC15 carries CE marking, UL approval, and CSA approval, satisfying the documentation requirements for installations under IEC, NEC, and CEC frameworks. Service factor is 1, meaning the unit is rated for continuous duty at its nameplate current without overload margin — a point to note for applications with sustained overload cycles.

MPN
3RW5245-2TC15