Skip to main content
Siemens 3RW5248-2AC15

Siemens 3RW5248-2AC15 Soft Starter, 240 A, 200-600 V, SIRIUS

MPN 3RW5248-2AC15
Active

Siemens SIRIUS 3RW5248-2AC15 soft starter, 240 A minimum rated current, 200-600 V AC, Class 10A/10E/20E trip, PROFIBUS, Modbus RTU/TCP, EtherNet/IP, PROFINET, UL, CSA, CE.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5248-2AC15 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width210 mm
Height393 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

240 A minimum — the load floor that governs motor starting

The 3RW5248-2AC15 is a SIRIUS hybrid switching device with a minimum rated operating current of 240 A, setting the floor for the motor load it can start and protect. Trip class is configurable: default CLASS 10A, with selectable CLASS 10E and CLASS 20E per IEC 60947-4-2. Rated operating voltage spans 200... 600 V AC, covering 208 V, 400 V, and 480 V nominal supplies without a tap change.

Fieldbus fit — PROFIBUS, Modbus, EtherNet/IP, PROFINET

This soft starter ships with onboard PROFIBUS DP, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET standard communication. The PROFINET interface supports PROFIenergy when paired with the PROFINET Standard communication module — useful for coordinated energy management in automated lines. Analog output is configurable as 4... 20 mA (default) or 0... 10 V via the High Feature HMI parameter set. Remote reset is available by cycling the control supply voltage — no fieldbus command required for a simple restart after a fault clears. Firmware updates are supported, and an error logbook is available with special accessories — useful for diagnosing repeated start faults without a laptop at the panel.

Mounting and thermal derating in the panel

Mounting is screw fixing with a vertical surface orientation; the unit can be rotated ±90° and tilted ±22.5° front-to-back. Clearance requirements: 100 mm upwards, 10 mm forwards, 0 mm backwards, 75 mm downwards, and 5 mm at the sides — plan the enclosure depth and gland plate accordingly. Operating temperature range is -25... +60 °C, with derating required at 40 °C or above. In a steel-mill or foundry ambient — where the panel air might hit 50 °C — expect a current derating that must be factored into the motor selection. Shock resistance is 15 g / 11 ms, dropping to 12 g / 11 ms if contact lifting is a concern. Dimensions: 393 mm height, 210 mm width, 203 mm depth — a substantial footprint that fits a standard 600 mm deep enclosure but will crowd a shallow 400 mm panel. The 210 mm width means it occupies three or four DIN-rail module widths depending on the rail layout.

Compliance and approvals — UL, CSA, CE

Carries UL approval, CSA certification, and CE marking — accepted across North America and the European Economic Area without additional testing. The product category is hybrid switching devices, reflecting the combination of electromechanical and semiconductor switching elements inside.

MPN
3RW5248-2AC15