Skip to main content
Siemens 3RW5513-3HA14

Siemens 3RW5513-3HA14 Soft Starter, 200-480 V, ATEX

MPN 3RW5513-3HA14
Active

Siemens 3RW5513-3HA14 soft starter, 200-480 V rated, ATEX, IECEx, trip class 10A/10E/20E/30E, PROFIBUS, Modbus RTU/TCP, EtherNet/IP, 170 mm width, 275 mm height, 152 mm depth.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5513-3HA14 specifications
ParameterValue
Mountingscrew fixing
Depth152 mm
Width170 mm
Height275 mm
Trip classCLASS 10 A / 10E (default) / 20E / 30E; acc. to IEC 60947-4-2
Service factor1.15
Digital output version3 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

What this soft starter delivers that a basic starter cannot

The 3RW5513-3HA14 is a Siemens soft starter rated for 200-480 V motor supply, with trip class options 10A, 10E (default), 20E, or 30E per IEC 60947-4-2. That trip class range means you can match the overload protection to the motor's thermal capacity and starting duty — a pump with a long acceleration time gets 30E, while a fast-starting conveyor stays at 10A. It carries ATEX and IECEx certification, so it is approved for installation in explosive atmospheres — not just a general-purpose starter. The control supply accepts 110-250 V at 50 or 60 Hz, which covers most plant auxiliary voltages without a separate transformer. Fieldbus options include PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFIenergy. That means it integrates into a PLC-based line without a gateway — the same part handles both discrete and networked control.

Mounting and panel integration — clearances that matter

The unit measures 170 mm wide, 275 mm high, and 152 mm deep. Forced-air clearance: 100 mm above, 75 mm below, 10 mm in front, 5 mm at the sides, and zero behind. That zero-backwards clearance means it can sit flush against the back panel — no wasted depth. Solid wire connections accept 2x (1.0-2.5 mm²) and 2x (2.5-10 mm²) per terminal. No screw terminals — the connection method is not listed as screw type, so expect spring-cage or push-in; verify the termination style from the product drawing before wiring.

Soft-start features for pump and conveyor duty

Voltage ramp and pump ramp down let you tailor acceleration and deceleration to the load — a pump gets a soft stop to avoid water hammer, a conveyor gets a controlled start to prevent product shift. Torque control and breakaway pulse handle high breakaway torque loads like crushers or mixers. DC braking and motor heating are built in — DC braking stops the motor quickly without a mechanical brake, and motor heating keeps windings dry in humid environments. Analog output can be set to 4-20 mA or 0-10 V for feeding motor current or power to a PLC or panel meter. Service factor 1.15 means the starter can handle 115% of rated current continuously — useful when the motor is oversized or running at the edge of its thermal limit.

Diagnostics and lifecycle management

Event list, error logbook, and trace function are standard — these record start/stop events, fault history, and parameter changes, which helps with root-cause analysis on a tripped line. Firmware update capability means the unit can be upgraded in the field without replacing hardware. Accuracy class 5 per IEC 61557-12 applies to the measurement functions — current and voltage readings are within 5% of true value, adequate for monitoring but not for billing-grade metering.

MPN
3RW5513-3HA14