Skip to main content
Siemens 5SL6232-7BB

Siemens 5SL6232-7BB SENTRON MCB, 2-Pole C-Curve 32 A, 6 kA

MPN 5SL6232-7BB

Siemens SENTRON 5SL6232-7BB, 2-pole miniature circuit breaker, C-curve, 32 A rated at 400 V AC, 6 kA breaking capacity per EN 60898 and IEC 60947-2, 2 modular width units.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL6232-7BB specifications
ParameterValue
Poles2
IP ratingIP20
Depth76 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

What the ratings mean for fit

The Siemens 5SL6232-7BB is a 2-pole miniature circuit breaker from the SENTRON series, rated 32 A at 400 V AC with a C tripping characteristic. The C-curve means it trips between 5 and 10 times rated current — suited for inductive loads like small motors or lighting banks where inrush is moderate, not for high-surge transformer primaries (that would call for a D-curve). Breaking capacity is 6 kA per both EN 60898 and IEC 60947-2 — that is the maximum prospective fault current the breaker can safely interrupt at 400 V AC. For a residential or light-commercial distribution board fed by a transformer with a known fault level under 6 kA, this holds. If the available fault current at the panel exceeds 6 kA, you need a higher-rated breaker or a current-limiting upstream device. Temperature derating is published: 32 A at 30 °C, 29.56 A at 40 °C, 28.16 A at 45 °C, 25.48 A at 55 °C. If the breaker sits in a warm enclosure — near other heat sources or in a non-ventilated panel — use the 40 °C or 55 °C column to size the load. The 2.3 W power loss per pole at rated current adds up; 4.6 W total for the two poles needs to be dissipated inside the enclosure.

Mounting and integration

Width is 36 mm (2 modular units), depth 76 mm, installation depth 70 mm. Mounts on a standard DIN rail in any position — vertical, horizontal, or flat — per the any-position rating. IP20 with connected conductors means it is protected against finger contact but not against moisture; keep it inside a closed panel or enclosure rated for the environment. Sealable — the breaker accepts a seal or lock to prevent unauthorized toggling, useful for safety circuits or critical loads. Supplementary devices (auxiliary contacts, shunt trips, alarm switches) are installable, so you can add remote status or trip indication without replacing the breaker.

MPN
5SL6232-7BB