Skip to main content
Siemens 5SP3816-3

Siemens SENTRON 5SP3816-3 Miniature Circuit Breaker, 16 A, 2

MPN 5SP3816-3
Active

Siemens SENTRON miniature circuit breaker, 5SP3816-3, 3-pole, 16 A rated, 25 kA breaking capacity, E tripping characteristic, 4.5 MW, standard rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SP3816-3 specifications
ParameterValue
Poles3
IP ratingIP40
Mountingstandard rail
Depth76.3 mm
Height128 mm

Product details

The E characteristic means it's built for a delayed trip — it handles short inrush currents better than a B or C curve, which is useful for transformer or capacitive loads where you don't want nuisance trips on startup.

Overvoltage category IV means it's rated for the main incoming supply — not just downstream sub-circuits — so it can be the first breaker after the utility meter. Temperature derating is published: 16 A at 30 °C, 15.2 A at 40 °C, 14.8 A at 45 °C, 14.4 A at 50 °C, 14 A at 55 °C. Wire range accepts 2.5 mm² minimum to 50 mm² maximum for both solid and stranded conductors — that's a wide range, letting you land anything from a small load circuit up to a main feeder. Saddle terminals and infeed at box terminal are standard, so wiring is straightforward with no special tools needed. IP40 with connected conductors — that's finger-safe for the front of the panel but not sealed against water ingress, so it belongs in an enclosure, not out in the weather. Depth is 76.3 mm, height 128 mm — standard MCB footprint, fits any DIN-rail enclosure with that clearance.

The integrated locking slide accepts a padlock, wire seal, or cable tie for lockout/tagout, which is a nice touch for maintenance isolation without adding an external lockout hasp. Supply cord position is any — top or bottom feed works, no orientation restrictions. Shock rated at 30 g for 11 ms, so it holds up in high-vibration environments like near large contactors or in mobile equipment.

MPN
5SP3816-3