Skip to main content
Siemens 5SU1674-7EK82

Siemens 5SU1674-7EK82 SENTRON RCBO, 125A, Type B+, 300mA

MPN 5SU1674-7EK82
Active

Siemens SENTRON RCBO, selective, 4-pole, 125 A, Type B+, 300 mA residual, 10 kA, 5SU1674-7EK82.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SU1674-7EK82 specifications
ParameterValue
Poles4
Depth77 mm
Width198 mm
Height90 mm
Energy limitation class3

Product details

What the ratings mean for fit

The 198 mm width and 77 mm depth tell you this is an 11-module-wide unit — that's a full-size device, not a slim 2-module RCBO. It needs a distribution board with enough spare ways, or you're rearranging the row. Mounting position is any, and the supply can enter from either top or bottom — that flexibility saves a headache when you're retrofitting into an existing panel where the busbar arrangement is already set. IP20 with the distribution board installed and conductors connected — that's protected against finger contact but not against dust or moisture. Keep it inside a closed panel, not out in the washdown zone. The thermal derating curve is published: 125 A at 30 °C, 115.62 A at 40 °C, 111.25 A at 45 °C, 106.25 A at 50 °C, 101.25 A at 55 °C, and 96.25 A at 60 °C (-). If your panel ambient runs hot — say 50 °C inside the enclosure — you're sizing for 106 A continuous, not 125 A. That's the number that decides whether your 100 A motor feeder holds or trips on a hot afternoon. Class C tripping characteristic means the magnetic trip operates at 5 to 10 times the rated current — a good fit for motor-starting inrush or transformer energization, where a Class B would nuisance-trip and a Class D might not clear a bolted fault fast enough. Overvoltage category III and pollution degree 2 — that's the standard for fixed-installation distribution boards in industrial and commercial buildings. Not for outdoor pole-top mounting, but fine inside the plant's main switchboard.

MPN
5SU1674-7EK82