Skip to main content
Siemens 6AG1332-5HB01-2AB0

Siemens 6AG1332-5HB01-2AB0 SIPLUS AO Module, -40..70°C

MPN 6AG1332-5HB01-2AB0

Siemens SIPLUS, analog output module, 6AG1332-5HB01-2AB0, 2 channels, -40 to 70 °C, EN 50155.

$513.08 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6AG1332-5HB01-2AB0 specifications
ParameterValue
Temp operating max10 °C
Temp operating min-20 °C
Depth120 mm
Width40 mm
Height125 mm
Conversion time per channel0.8 ms

Product details

The 6AG1332-5HB01-2AB0: Two output channels share a common conversion time of 0.8 ms per channel. The module accepts voltage (0–10 V, 1–5 V, ±10 V) and current (0–20 mA, 4–20 mA, ±20 mA) outputs, covering nearly any loop or actuator interface on a 24 V DC control bus. On the current outputs the load can go up to 500 Ω; voltage outputs need a minimum 1 kΩ load. Diagnostics are fully parameterizable — the module can raise a group error (red SF LED) and read back fault details over the backplane. Isolation between channels and the bus is tested at 500 V DC, and reverse polarity on the supply is blocked onboard. For inductive loads, the settling time stretches to 0.5 ms (1 mH) or 3.3 ms (10 mH); resistive and capacitive loads settle in 0.2 ms and 3.3 ms respectively.

Beyond EN 50155, the module carries UL (File E239877), CE, KC, EAC, and RCM marks. The 24 V DC supply must come from a source that meets EN 50155 for railway installations, but the module itself is rated for general industrial approvals as well.

This module is in current lifecycle stage. The 20-pin front connector is required but sold separately.

MPN
6AG1332-5HB01-2AB0