What the ratings mean for fit
The 6AG1332-5HB01-2AB0: Two output channels share a common conversion time of 0.8 ms per channel. The module accepts voltage (0–10 V, 1–5 V, ±10 V) and current (0–20 mA, 4–20 mA, ±20 mA) outputs, covering nearly any loop or actuator interface on a 24 V DC control bus. On the current outputs the load can go up to 500 Ω; voltage outputs need a minimum 1 kΩ load. Diagnostics are fully parameterizable — the module can raise a group error (red SF LED) and read back fault details over the backplane. Isolation between channels and the bus is tested at 500 V DC, and reverse polarity on the supply is blocked onboard. For inductive loads, the settling time stretches to 0.5 ms (1 mH) or 3.3 ms (10 mH); resistive and capacitive loads settle in 0.2 ms and 3.3 ms respectively.
Compliance and approvals
Beyond EN 50155, the module carries UL (File E239877), CE, KC, EAC, and RCM marks. The 24 V DC supply must come from a source that meets EN 50155 for railway installations, but the module itself is rated for general industrial approvals as well.
Sourcing and lifecycle
This module is in current lifecycle stage. The 20-pin front connector is required but sold separately.