Skip to main content
Siemens 6ES7132-4HB10-0AB0

Siemens 6ES7132-4HB10-0AB0 ET200S 2DO Relay Module, 5A, 15mm

MPN 6ES7132-4HB10-0AB0

Siemens 6ES7132-4HB10-0AB0, SIMATIC DP ET200S electronic module, 2 relay outputs, Form C, 24-48V DC / 24-230V AC, 5 A, 15 mm width, 52 mm depth, 81 mm height, 0.6 W power loss.

$55.55 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7132-4HB10-0AB0 specifications
ParameterValue
Depth52 mm
Width15 mm
Height81 mm

Product details

The Siemens 6ES7132-4HB10-0AB0 is a SIMATIC DP ET200S electronic module that fits into a 15 mm slice of the remote I/O station. It gives you two relay outputs with Form C contacts, each rated for 5 A continuous — enough for pilot-duty solenoids or small contactors in a cure-press panel. The coil power comes from the backplane bus (24 V DC via the power module), so you only need to wire the load side L+ and the commons. On the switching side, keep the cycle rate in mind: 2 Hz max on resistive or lamp loads, and 0.5 Hz with inductive loads. That matches a typical press valve that cycles once every few seconds — not a fast-pick-and-place, but fine for a cure recipe's step sequence. Lifecycle status is current.

MPN
6ES7132-4HB10-0AB0