Skip to main content
Siemens 6ES7134-6GD01-2BA1

Siemens 6ES7134-6GD01-2BA1 ET 200SP 4-Channel Analog Input

MPN 6ES7134-6GD01-2BA1
Active

Siemens SIMATIC ET 200SP, Analog Input Module, 4 differential inputs, 0 to 20 mA / 4 to 20 mA, 16 bit incl. sign, 15 mm width, BaseUnit BU type A0, A1.

$349.76 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7134-6GD01-2BA1 specifications
ParameterValue
Depth58 mm
Width15 mm
Height73 mm
Measurement principleintegrating (Sigma-Delta)
Conversion time per channel180 / 60 / 50 ms

Product details

4 differential inputs, 16-bit resolution, Sigma-Delta conversion

The Siemens 6ES7134-6GD01-2BA1 is a 4-channel analog input module for the ET 200SP distributed I/O system. It accepts differential inputs in the 0 to 20 mA range at 16-bit resolution including sign, and the 4 to 20 mA range at 15-bit resolution. The integrating Sigma-Delta measurement principle filters high-frequency noise at the converter, so the reading you log is the process value, not coupled interference. Each channel is configurable for 2-wire or 4-wire transmitters, and the module detects wire-break on 4 to 20 mA loops — a standard diagnostic that saves chasing phantom opens on a panel with 50 loops.

BaseUnit compatibility and physical fit

Automatic encoding means the module identifies itself to the bus adapter on insertion; no DIP switches to set. The usable BaseUnits also support 2-wire and 4-wire connections, so the wiring scheme is determined by the BaseUnit selection, not the module itself.

Diagnostics and channel-level visibility

The module reports group error, diagnostic alarm, overflow/underflow, and channel-specific diagnostics between the 2-wire current input group and the 4-wire voltage input group. A green LED per channel shows channel status; a combined green/red LED indicates module diagnostics. No per-channel diagnostic LED — the group alarm goes to the CPU, and you read the exact channel via the diagnostic buffer. Wire-break detection is active on 4 to 20 mA ranges; short-circuit detection covers the encoder supply to ground or an input to the encoder supply in 2-wire mode. These are the diagnostics that keep a loop-powered transmitter fault from looking like a bad module.

MPN
6ES7134-6GD01-2BA1