Skip to main content
Siemens 6ES7135-6HD00-0BA1

Siemens 6ES7135-6HD00-0BA1 Analog Output Module, 4 AO

MPN 6ES7135-6HD00-0BA1
Active

Siemens 6ES7135-6HD00-0BA1, SIMATIC ET 200SP analog output module, 4 AO, U/I, 15 mm width, ±10 V 16-bit, 0-20 mA 15-bit, BU type A0/A1.

$152.40 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7135-6HD00-0BA1 specifications
ParameterValue
Depth58 mm
Width15 mm
Height73 mm

Product details

4 analog outputs in a 15 mm slice

The Siemens 6ES7135-6HD00-0BA1 is a 4-channel analog output module for the ET 200SP distributed I/O system. The module covers both voltage and current output ranges: ±10 V at 16-bit resolution including sign, 0 to 10 V at 15 bit, 0 to 20 mA at 15 bit, and 4 to 20 mA at 14 bit. That 16-bit ±10 V path gives you the finest step resolution for precision control loops like valve positioning or drive speed setpoints.

Diagnostics and wiring

Diagnostic alarm, group error, and per-channel wire-break and short-circuit detection are built in. The green/red DIAG LED and green channel-status LEDs give a quick visual on module health and output state without needing the TIA Portal open. It mates with BaseUnits type A0 or A1 — the same base unit family used across the ET 200SP analog and digital slices, so you don't need a special carrier for this module. Shielded cable runs up to 1000 m for current outputs, 200 m for voltage outputs. The module draws 150 mA max from the 24 V DC backplane bus and dissipates 1.5 W typical. Isolation is tested at 707 V DC type test between the channels and the backplane.

The 6ES7135-6HD00-0BA1 carries I&M data (I&M0 through I&M3) and supports HW functional status from FS07. It does not support isochronous mode or oversampling, so it's not the choice for high-speed synchronized output updates in motion control applications.

MPN
6ES7135-6HD00-0BA1