Skip to main content
Siemens 6ES7141-5AH00-0BA0

Siemens 6ES7141-5AH00-0BA0 PLC Communication Module

MPN 6ES7141-5AH00-0BA0
Active

Siemens ET 200AL, 6ES7141-5AH00-0BA0, PLC Communication Module, 16 digital inputs, 8 outputs, M8 shielded, IP65/67, SIL 2, Cat. 3, -30 to 55 °C.

$104.14 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7141-5AH00-0BA0 specifications
ParameterValue
IP ratingIP65
Depth40 mm
Width45 mm
Height159 mm
I/O channels8

Product details

What this module is for

The Siemens 6ES7141-5AH00-0BA0 is a compact ET 200AL I/O module packing 16 digital inputs and 8 digital outputs in a 45 mm wide housing built for the pit. It connects via M8, 4-pin shielded connectors, rated IP65/67, so it shrugs off the abrasive dust and washdown cycles on a crusher or flotation line.

Temperatures and environmental limits

Rated from -30 °C to 55 °C ambient, this module handles the cold starts in a northern pit and the heat inside a sealed panel next to a VFD.

Input and output specs that matter

The 16 inputs sink 3.2 mA typical at 24 VDC, with signal thresholds of -30 to +5 V for logic 0 and +11 to +30 V for logic 1 — compatible with standard 24 V sensors and 2-wire proximity switches. Input transition times are 1.2 ms to 4.8 ms, fast enough for most discrete sensing on conveyors and chutes. The 8 outputs provide a total encoder supply current of 1.4 A, with electronic short-circuit protection per module and reverse-polarity protection against destruction. Power loss is 2.7 W typical, so it doesn't cook its neighbours in a dense I/O rack.

Safety and diagnostics

Rated SIL 2 per IEC 62061 and Category 3 per ISO 13849-1, this module can be used in safety-related applications up to those levels — guarding a hazard zone on a mill or conveyor. Diagnostic alarm is parameterizable, with a green/red LED for module diagnostics and a green LED per channel for status — helps a field service tech isolate a fault without a laptop. I&M data up to I&M3 is supported, making asset tracking and firmware management straightforward during commissioning.

MPN
6ES7141-5AH00-0BA0