Skip to main content
Siemens 6GT2801-2BA10

Siemens 6GT2801-2BA10 RF340R RFID Reader, RS422, 13.56 MHz

MPN 6GT2801-2BA10
Active

Siemens SIMATIC RF300 RF340R GEN2 reader, RS422 interface (3964R), 13.56 MHz, IP67, 75 x 75 x 41 mm, M12 8-pin.

$387.35 – $1,055.73 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6GT2801-2BA10 specifications
ParameterValue
IP ratingIP67
Mounting2 x M5 screws
Shock acceleration500 m/s²
ColorTi gray
Depth75 mm
Width75 mm
Height41 mm
MaterialPA 12

Product details

Reader that talks to the right transponders

The Siemens 6GT2801-2BA10 is a SIMATIC RF340R GEN2 RFID reader with an integrated antenna, built for the RF300 system. It talks RS422 using the 3964R protocol — that is a point-to-point serial link, not a fieldbus, so expect a dedicated cable run back to the communication module. It operates at 13.56 MHz and reads RF300-specific, ISO 15693, ISO 18000-3, and ISO 14443 transponders. The maximum read range is 140 mm, but that figure depends on the transponder type — Siemens application note 67384964 has the per-transponder distances. Power comes from a 24 V DC supply (20.4...28.8 V range), drawing 0.06 A typical. The M12 8-pin connector carries both power and the RS422 signals — one cable, one connector.

IP67 and the enclosure reality

The housing is IP67-rated PA 12 in Ti gray, 75 x 75 x 41 mm, fastened with two M5 screws. IP67 means the reader survives hose-down and temporary immersion — it belongs on a machine frame or conveyor stand, not inside a control cabinet. The M12 connector's O-ring is the wet-end seal, not the housing threads. Shock resistance is 500 m/s² per EN 60721-3-7 Class 7M2; vibration resistance is 200 m/s². That covers most industrial handling and conveyor vibration. The reader is not multitag-capable — it reads one transponder at a time. For write access, expect 0.13 ms per byte, same for read. Transfer rate tops out at 106 kbit/s over the air.

Active production — no obsolescence concern

MTBF is listed at 260 a — that is 260 years mean time between failures under stated conditions. The number comes from a standard reliability prediction, not field data, but it tells you the design target is long service life.

MPN
6GT2801-2BA10