Skip to main content
ABB 1SFA894011R7000

1SFA894011R7000 ABB PST175 175A Softstarter, 90kW/400V, Ramp

MPN 1SFA894011R7000
Obsolete

ABB PST175 softstarter, 1SFA894011R7000, 175 A in-line / 90 kW at 400 V, ramp 0-120 s, FieldBusPlug, built-in electronic overload, IP00 main terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA894011R7000 specifications
ParameterValue
Terminal typeMain Circuit: Bars
VoltageMain Circuit 208 ... 600 V AC
Frequency50/60 Hz
ProtocolFiledBusPlug(Standard)
Temp operating max50 °C
Temp operating min0 °C

Product details

Control and communication — FieldBusPlug ready

Communication is via the standard FieldBusPlug interface, meaning you can snap in a PROFIBUS, DeviceNet, or other fieldbus adapter without opening the main power wiring. The control circuit voltage is 24 V DC; the supply circuit accepts 100-250 V AC. Four signal relays are built in — run, fault, bypass, and overload — each with a dedicated LED (red for fault, yellow for protection). That gives the PLC a clean status word without extra contactors. Terminals: main circuit uses bars with a 10.2 mm hole diameter; control circuit accepts 1 x 2.5 mm² rigid, tightened to 0.5 N·m. Main terminals are IP00 per IEC 60529 and IEC 60947-1 — install in a suitable enclosure for the environment.

MPN
1SFA894011R7000