Skip to main content
ABB 1SFA894019R7000

ABB PSTB840 1SFA894019R7000 Softstarter, 840 A, 450 kW

MPN 1SFA894019R7000
Obsolete

ABB PSTB840 softstarter, order code 1SFA894019R7000, 840 A rated operational current in-line connection, 450 kW at 400 V, 208-600 V AC main circuit, integrated electronic overload protection, FieldBusPlug communication, ramp time 0-120 s.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA894019R7000 specifications
ParameterValue
Terminal typeMain Circuit: Bars
VoltageMain Circuit 208 ... 600 V AC
Frequency50/60 Hz
ProtocolFiledBusPlug(Standard)
Temp operating max50 °C
Temp operating min0 °C

Product details

Softstarter for heavy motor starts

The ABB PSTB840 (1SFA894019R7000) is a softstarter rated for 840 A in-line connection, delivering 450 kW at 400 V — sized for large induction motors driving pumps, conveyors, or compressors in industrial plants. The 208-600 V AC main circuit voltage range covers standard low-voltage networks globally. Built-in electronic overload protection eliminates the need for a separate overload relay, saving panel space and wiring. The current limit function is adjustable from 1.5 to 7 times the rated current, giving flexibility for different starting torque requirements. Ramp time is configurable from 0 to 120 seconds, allowing a smooth acceleration profile matched to the load. Initial voltage during start can be set between 30% and 70% of line voltage, with a step-down voltage special ramp from 100% down to 30% for soft stopping.

Control and communication

Control supply voltage is 100-250 V AC; a separate 24 V DC control circuit voltage is also available for logic-level interfacing. The unit includes run, fault, by-pass, and overload signal relays, plus a red fault LED and yellow protection LED for local status indication. Communication is via a standard FieldBusPlug, allowing direct connection to a fieldbus network without additional gateway hardware. Analog output provides 0-10 V for speed or current feedback to a PLC or drive controller. Main circuit terminals are bars with a 12.5 mm hole diameter for bolted connections; control circuit terminals accept rigid 1 x 2.5 mm² wire with a tightening torque of 0.5 N·m. The inside-delta connection option enables higher starting capacity — 1455 A and 800 kW at 400 V — for demanding applications.

MPN
1SFA894019R7000