Skip to main content
ABB 1SFA898103R7000

ABB PSTX30 Soft Starter 1SFA898103R7000, Auto Phase Sequence

MPN 1SFA898103R7000
Active

ABB PSTX30 soft starter, 1SFA898103R7000, auto phase sequence detection, ramp time 1-120 s, 208-600 V AC, multi-protocol fieldbus.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA898103R7000 specifications
ParameterValue
Terminal typeCable Clamp
Voltage208 ... 600 V AC
Frequency50/60 Hz
Temp operating max60 °C
Temp operating min-25 °C

Product details

The ABB PSTX30 soft starter 1SFA898103R7000 is a current-production motor starting solution with built-in auto phase sequence detection, meaning it verifies the incoming phase rotation before the motor starts — a check that prevents reverse-rotation damage on pumps, conveyors, and compressors where direction matters. Rated for 208-600 V AC at 50/60 Hz, with a control supply of 100-250 V AC and a separate 24 V DC control circuit for the logic side. The ramp time is adjustable from 1 to 120 seconds, giving you the window to match the acceleration profile of the load — short for low-inertia fans, long for high-inertia centrifuges.

Fieldbus & I/O

Communication options cover Modbus-RTU, Modbus-TCP, Ethernet-IP, EtherCAT, DeviceNet, CANopen, Profibus, Profinet, BACnet-IP, and BACnet-MSTP — the PSTX30 is a universal node that fits into any control architecture without a gateway. Analog outputs are configurable for 0-10 V, 0-20 mA, or 4-20 mA, letting you feed motor current, voltage, or power factor to a PLC or remote display. Dedicated run, fault, bypass, and overload signal relays are onboard, so you get hardwired status without pulling from the fieldbus.

Protection & Warnings

Built-in electronic overload protection eliminates the need for a separate overload relay, and the protection suite covers current imbalance, earth fault, locked rotor, phase reversal, under/over voltage, and user-defined limits. Warning outputs flag conditions like current imbalance, underload, faulty fan, motor runtime limit, THD(U), and SCR thyristor overload — useful for predictive maintenance before a trip occurs.

MPN
1SFA898103R7000