Skip to main content
ABB ACS550-01-06A9-4

ABB ACS550-01-06A9-4 Frequency Inverter, 6.9 A, 3 kW, EOL

MPN ACS550-01-06A9-4
End of Life

ABB ACS550-01-06A9-4 Frequency Inverter, 3-phase 380-480 VAC, 6.9/5.4 A, 3/2.2 kW, 0-500 Hz, R1 frame, IP21.

$1,272.54 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ACS550-01-06A9-4 specifications
ParameterValue
Product typeFrequency Inverter
Voltage3 Phase 380…480 V AC
Current6.9 / 5.4 A
Frequency0 … 500 Hz
IP ratingIP21
Weight6.16 kg
Dimensions212 x 125 x 369
Frame sizeR1

Product details

The ABB ACS550-01-06A9-4 is a frequency inverter from the ACS550 family, a general-purpose VFD line known for straightforward commissioning and reliable motor control. This specific variant is rated for 6.9 A output current (heavy-duty) and 5.4 A (light-duty), corresponding to motor powers of 3 kW and 2.2 kW respectively on a 3-phase 380-480 VAC supply. The output frequency range spans 0 to 500 Hz, covering standard induction motors and higher-speed spindle applications within that power band.

Sourcing reality — this drive is end-of-life

For a line-down situation, the closest functional drop-in from the same series is the ACS550-U1-03A3-4. It shares the same R1 frame, voltage class, and IP21 rating, but check the current rating: the U1-03A3-4 is a lower-amperage variant (3.3 A heavy-duty). If your load demands the full 6.9 A, you'll need to move up to a larger frame or the ACS580 equivalent. No rewiring of the power terminals is needed between same-frame ACS550 variants — the terminal layout is identical.

The dual current rating — 6.9 A heavy-duty / 5.4 A light-duty — is the key selection parameter. A 3 kW motor at 400 V drawing around 6.5 A full-load will run comfortably in HD mode. If your motor nameplate shows 5.2 A, you're in LD territory and could even oversize the drive slightly for headroom. The 0-500 Hz output frequency means this drive can run standard 50/60 Hz motors as well as higher-speed spindles up to 500 Hz, but the motor's mechanical limits (bearing speed rating, rotor balance) will be the constraint — not the drive. For a standard 4-pole induction motor at 50 Hz, you'd set the maximum frequency to 50 Hz and let the drive ramp up from there.

The R1 frame accepts power wiring up to 4 mm² (AWG 12) for the input and motor terminals. Control wiring uses spring-cage terminals on the detachable I/O board — strip length 8 mm, wire size 0.5-2.5 mm². The standard I/O includes two analog inputs (0-10 V or 4-20 mA selectable), one analog output, six digital inputs, and two relay outputs. For fieldbus integration, the ACS550 accepts an optional module (Modbus RTU is standard on the RS-485 port; PROFIBUS or DeviceNet require an add-on card in the option slot).

MPN
ACS550-01-06A9-4