Skip to main content
ABB F202A-40/0.03-110V

ABB F202A-40/0.03-110V RCD, 40A 30mA 2P 110VAC DIN Rail

MPN F202A-40/0.03-110V

ABB F202A series residual current device, F202A-40/0.03-110V, 40 Amp, 30 mA, 2-pole, 110 VAC, DIN rail mount.

$504.76 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F202A-40/0.03-110V specifications
ParameterValue
Current40 A
Poles2
MountingDIN Rail

Product details

The ABB F202A-40/0.03-110V is a 2-pole residual current device (RCD) rated for 40 A continuous current with a 30 mA earth leakage trip threshold, operating on a 110 VAC control supply. The 30 mA sensitivity is the standard for personal protection against electric shock — it trips fast enough to prevent ventricular fibrillation under most fault conditions. The 40 A rating means it can serve as the main protection for a sub-distribution board or feed a group of circuits up to that load; it is not sized for a single high-current appliance like a large motor starter. The 2-pole construction (switching both line and neutral) is typical for single-phase applications where the neutral must be isolated.

The compact 2-pole body takes up two module widths (about 36 mm) in the enclosure, so factor that into your panel fill. No special tools needed for installation — clip it on, torque the terminals to the manufacturer's spec (typically 2-3 Nm for the line/load conductors), and you are done. The DIN-rail mount makes it a straightforward swap in an existing distribution board or a new build.

MPN
F202A-40/0.03-110V